A fixed end up screwed directly into the structural side of a storagewall unit
FIXED END CUPS

Our default end cups that hold our lateral rails up are in a fixed position. You can specify a particular height for them to be placed at if you need a minimum amount of room.

An adjustable end cup sits in an extra row of drilling on a storagewall structural side, allowing it to be moved up and down at will.
ADJUSTABLE END CUPS

If you need variable height for your lateral rails then we can supply specialised end cups, allowing the rail to be moved up and down on a pitch of 32mm. An extra row of drilling will need to be added to the panel. 

 
A garment rail spans the width of a storagewall unit, suspended underneath an MFC shelf. Several coat hangers are suspended from the rail.
LATERAL GARMENT RAIL

A sturdy metal rail for hanging garments & coats. Set in a fixed position by default, but can be supplied as height adjustable is specified.

Pull out garment rails are fitted into the bottom of an MFC shelf in a storagewall unit. Coat hangers are suspended from the underside.
PULL OUT GARMENT RAIL

A sturdy metal rail for hanging garments & coats. This extending arm can be pulled out for easier access. Fixed to the bottom of an MFC shelf.